Jimzo is a traditional art of forming religious images. Jim means "clay" and Zo means "art", literally "clay art". In Bhutan, it can be traced back to the 7th century, to the time of Tibetan King Songtsen Gampo (569–649?), who is believed to have built 108 Lhakhangs (temples), under which the pioneering Buddhist temples such as Kichu and Jampa Lhakhangs were built. Various clay paintings from different centuries, beginning with the time of Guru Rinpoche, attest to the existence of clay art in Bhutan much earlier. In the time of Terton Pema Lingpa (1450-1521), this art became popular. Towards the end of the 17th century, the art was codified and included by the fourth Desi (temporary ruler) Gyalse Tenzin Rabgye (1638–1696), as one of the thirteen arts and crafts of Bhutan. Later, at the time of Zhabdrung Ngawang Namgyal (1594-1651) in the 17th century, a very skilled sculptor named Trulku Dzing was invited to Bhutan. Trulku Dzing erected numerous clay figures in Punakha and Wangduephodrang Dzong. The art was later codified and included as one of the thirteen traditional arts and crafts of Bhutan by the 4th Druk Desi (temporary ruler) Gyalse Tenzin Rabgye in the late 17th century. Since then the art of sculpting has been maintained and passed from teacher to students over many generations until today. Bhutanese jim zop (sculptors) are known for the quality and intricacy of creating delicate clay sculptures. They practice sculpting as a pious act since it is based on the iconographic principles of Buddhist art. It is very important to adhere to the rules that prescribe the precise measurement of the body structure in relation to the limbs, postures, eyes, ears, fingers and nose and the body tints, garments and ornaments. a. Religious Statues and Ritual Objects: Sculptors make clay statues, ritual objects and tsha tsha (miniature clay stupa) and clay masks worn during festivals. Numbers of exceedingly fine and intricate religious sculptures and ritual objects made of clay can be seen in every temple, monastery, and the dzongs of Bhutan. These clay sculptures vary in sizes, varying from tiny statues to over twenty feet. There are clay sculptures of the Buddhas and Bodhisattvas, various deities, gods, goddesses and prominent religious figures which depict the foundation of faith, worship and reverence for the Buddhists. b. Types of Clay used in Sculpting: Clay is the basic material for making sculptures. A special kind of clay can be found deposited in small quantities between mud and gravels usually in marshy areas. Sculptors use the best quality clay as the images and objects they make must stand against the change of weather for generations. Clay is processed into three different forms; tsa dam, kong dam, and jim dam. Each one is used for a specific purpose. Tsa dam is made by mixing clay powder with daesho (paper made from daphne plants) in the ratio of 7:3. If paper is not available, pulps made from the raw bark of daphne plant are used as substitute. This mixture prevents the mud from disintegrating when dried. Tsa dam is used for moulding the basic structure of the statue. Kong dam is prepared in the same way as tsa dam, but by adding more water to make the clay relatively thinner and softer. Kong dam is applied over the basic structure moulded from tsa dam to give proper shape to the statue. Generally the proprietor adds any or all of the seven precious substances (gold, silver, and turquoise, and coral, pearl, bronze and any other precious stones) to tsa dam and kong dam in order to increase the aura of the statue. Jim dam is applied as the final and finishing touch to the statue. To prepare jin dam; the clay powder is mixed with water and then stirred thoroughly until it turns into a thin paste. It is then filtered with the help of a thin cloth. The thin filtered paste is collected in a utensil and then placed on fire until the water component is evaporated. What is left in the pot is a very fine powder. This powder is then mixed with daphne papier mache to give it the binding strength which prevents the clay from cracking. This mixture is again mixed with water and stirred and applied to give the final touches to the statue. c. Process of Clay Sculpting: Clay sculpting process starts with the measurement of the space available where the statue will be kept later, or the size required by the owner/sponsor. Accordingly, the basic structural frame is made by using copper wires for smaller statues, iron or steel rods for bigger statues as support. Steel rods are wrapped with copper wire to add the value of the object. Gold and silver wires are considered the best to make the basic frame. The frame is added with tsa dam while the internal part is left hollow for zung to be inserted later. When the tsa dam on the structure dries perfectly, kong dam is applied over it to give all the external physical features, forms and the attires. The parts such as hands and head are made separately and attached later to the body for smaller statues, though the head of bigger statues are made directly with the statue. The sculptor must ensure that the parts made separately are proportionate to the whole structure. Any part of the statue that is not proportionate to the whole body is considered an impious act of the sculptor and therefore must be avoided at all cost. Sculpting is a tedious job, requiring the sculptor to apply the wooden chisel again and again to fill any gaps or remove the lumps over and over again. The statues are left for a long time to allow the clay to dry naturally, and to develop minor cracks which are also left unrepaired to allow air to pass for rapid drying. When no more cracks appear, it means the clay has dried up completely. The cracks are then repaired with tsa dam by mixing with glue. Once this is done, the sculptures are ready for final layers of finishing using jin dam. At this stage the sculpture is finally ready for zung (the inner relic). Learners have to undergo rigorous training for several years under a master sculptor known as Jimzo lopoen. As sculpting for religious purpose is considered a spiritual act, sculptors have to choose the most auspicious day and time to start a project. Once completed, an expert (usually a monk) will insert a zung shing or sog shing (a strut inside the statue as its backbone) and zung consisting of written mantras and other precious substances. Then the statue is painted using appropriate colours. Upon completion of all these steps, a drub or rabney ceremony is conducted by an accomplished lama. The painters and sculptors are highly regarded for their profession.

Nonpar or mukhpar is tool for decorating breads. It is made from wood with applying small pieces of wires. In the front of nonpar is designed ornament which will be put on the face of round bread.

The different species of nettle grow at different altitudes between 1200 and 3000 meters. The tradition of weaving cloth from nettle yarn, which was practiced for decades by the women of Ney village in Gangzur Gewog (block) in Lhuentse Dzongkhag (district), had once disappeared from the village. According to them, it has been more than 40 years since they saw their grandparents weaving cloth from the nettle plant. People used to make thak-pa (rope), khor-ga (bag), shing-ka (old women's clothes), pha-tsa (sacks), bra-gar (old men's clothes), etc. Nettle fabrics are still used for traditional bowstrings in different parts of the country. Nettle plants are readily available in villages, but a series of processes are required to turn them into a fine yarn. It is said that making yarn from nettle plants lost popularity after cotton became readily available. This is also because it is available as a finished product, which reduces the workload. An elderly resident from Ney, Tenzin Wangmo, tells how they use nettle fiber for weaving. She tells that they used to use a different process. First, a hole was dug in which the nettle bark and the hardwoods needed were placed to heat the stone. Then ash mixed with water was applied to the nettle bark and it was placed in the previously dug hole. The bark coated with ash and the hot stone were alternately placed in the hole and covered with thick ash to prevent the fibers from being destroyed by combustion, and kept for 2 to 3 nights. The last process was washing the fibers in a draining river by continuous beating until they were white.

Inscribed in 2020 (15.COM) on the Representative List of the Intangible Cultural Heritage of Humanity As the eighth day of the fourth lunar month (Buddha's Birthday) approaches, the entire country, from otherwise tranquil Buddhist temples to bustling city centers, lights up with colorful lanterns. A rite to celebrate Shakyamuni's birth is observed nationwide and public processions of people holding lanterns are held. Records associating Buddhism and the lotus lanterns dates back to the 9th-century according to Samguksagi(Histrory of the Three Kingdoms). And there are records showing that the lotus lantern festival was organized around Buddha’s birthday in the Goryeo dynasty(918-1392). Originally a religious ritual to celebrate Shakyamuni's birth, Yeondeunghoe has become a representative national spring festival open to all. Made of a bamboo frame, or a steel wire frame covered by traditional paper, the lanterns decorating Buddhist temples and public spaces are crafted by traditional artisans who share their knowledge and skills with lay participants. Members of the public can participate in the festival carrying lanterns they made to express good wishes not only for themselves and their families, but for their neighborhoods and the entire nation. The lighting lanterns also symbolizes enlightening the minds of the individuals, the communities, and the whole society through Buddha's wisdom. The primary element of the annual festival starts with bathing an image of the baby Buddha as a ritual celebrating Shakyamuni's birth. This sacred ritual is followed by a public procession of lantern-bearing participants. After completing the procession, participants gather for recreational events. The spirit of unity culminates in collective game activities as social boundaries are temporarily erased.

South Korea 2020